Generator Wireless Remote Control Start and Off Set by hiphen

Benin City | 10 May 2023

Generator Wireless Remote Control Start and Off Set by hiphen, Negotiable

Benin City | 10 May 2023, 07035146988, №89631, views: 14
    Generator Wireless Remote Control Start and Off Set by hiphen
    Low cost controller designed to start/stop a generator manually and remotely
    Suitable for 1-3 phase gasoline and diesel gensets
    Designed for front panel mounting
    Survives cranking dropouts
    Generator protection, built-in alarms and warnings
    This set is designed to wirelessly control any electric start generator having a remote start input or being specially adapted for this purpose.
    It includes a 2-button transmitter and a receiver with relayed normally open (NO) and normally closed (NC) contact groups. The set could remotely start and stop a generator on 10-100 meter distance depending on possible obstacles between transmitter and receiver directly connected to generator.
    4PRO WT433-02 GENERATOR WIRELESS REMOTE CONTROL TRANSMITTER
    TECHNICAL SPECIFICATIONS:
    • Current consumption in active state: ≤12mA
    • Working frequency: 433.92 MHZ
    • Modulation: AM
    • Transmit distance: 10-100m
    • Dimensions: 61×30×12mm
    4PRO WR433-01 GENERATOR WIRELESS REMOTE CONTROL RECEIVER
    TECHNICAL SPECIFICATIONS:
    • Voltage: 12V DC or 24V DC depending on configuration settings
    • Working temperature: -30?-+70?
    • Frequency: 433MHz
    • Memory capacity: 30 learning/fixed code transmitters
    • Standby current consumption: ≤9mA
    • Relay current output rating: up to 5A
    • Dimensions: 62×43.5×30mm
    RECEIVER CONFIGURATION SETTINGS
    To change the configuration jumper settings, please remove a receiver plastic case by loosening two screws from the device bottom side.
    3S-Jumper (if closed): to activate the relay for 3 seconds only;
    L-Jumper (if closed): to activate/deactivate the relay by the ON button only with both state fixed;
    M-Jumper (if closed): to activate the relay by the ON button and deactivate by the OFF button;
    If all above-mentioned jumpers are opened: to activate/deactivate the relay by the ON button only without fixed state;
    12V/24V-Jumper: 12V DC (if closed) or 24V DC (opened).
    Note: M-Jumper must be closed for the most of the generator controllers.
    WE CAN SUPPLY AND INSTALL IN ANYWHERE IN NIGERIA
    OFFICES IN LAGOS, ABUJA, PORT HARCOURT AND BENIN CITY
    Please CALL/WHATSAPP: 0703-514-6988, 0807-779-7562,0802-589-7223, 0818-116-0990
    Email: info (AT) hiphensolutions.com
    Web: www.hiphensolutions.com/products
    We are Multi-Award Winning company in Technology Solutions,Access Control, Safety, Security and Automation Systems
    Share with your friends!


    Contact ad author
    07035146988
    07x xxx xxxxView contacts
    Leave a comment for this ad 0
    You must Sign Up or Sign In to post your comment

    Related Ads
    Moving & Storage
    Negotiable
    Lagos
    5 January
    Moving & Storage
    1 200 NGN (₦)
    Ikeja
    14 December
    2023
    Moving & Storage
    Negotiable
    Benin City
    10 May
    2023
    Moving & Storage
    Negotiable
    Benin City
    10 May
    2023
    Moving & Storage
    Negotiable
    Benin City
    10 May
    2023
    Moving & Storage
    Negotiable
    Benin City
    10 May
    2023
    Negotiable
    07035146988
    offline
    private person
    on the site from 5 January 2023
    All author ads
    Contacts: view contacts
    Ph.
    07x xxx xxxx
    Share with a friend
    Complaint
    Print
    14 views ads
    0 of them today
    View statistics

    Country: Nigeria
    City: Benin City
    Category: Services, Moving & Storage
    Post ID: 89631